Kinematics • Unit 1 Laboratory Report
AP Physics C/ECE1401 · ECE1201 · Honors Physics
Laboratory record
Lab A • Physical motion detector graph matching
Driving question: Can you reproduce a target position–time and velocity–time trace by changing your own motion relative to a sensor?
Structured procedure:
- Set the sensor’s positive direction away from the detector. Choose a target with a positive velocity, stop, negative velocity, or reversal.
- Sketch a target x(t) trace and predict where its v(t) graph is positive, zero, and negative.
- Walk the target motion at least three times. Export the real recorded data from Vernier, preserving units.
- Choose a straight section of x(t), paste paired t,x measurements below, and compare its fitted slope with the expected velocity.
- Explain two specific differences between your attempt and target and how you would improve the procedure.
Enter data from a real measurement and select Calculate.
Lab B • Determine gravitational acceleration using Vernier
Driving question: How accurately does the curvature of a measured position–time graph estimate gravitational acceleration?
Structured procedure:
- Align the motion sensor with the intended vertical motion and establish a consistent positive direction. Confirm that the moving object can be measured safely.
- Collect a vertical-motion record in Vernier; select an interval that excludes release and sensor artifacts, and export position and optionally velocity data.
- Paste at least five t,y points. Use the quadratic fit y=A+Bt+Ct²; interpret A, B and a=2C by coefficient comparison.
- Repeat with the same geometry. Record measurement resolution, compare fits, inspect residuals, and evaluate consistency with accepted g.
- For 1401, differentiate the fitted y(t), analyze v(t) and use the Vernier integral tool to estimate displacement from a selected v–t interval.
Safety: never drop objects toward a motion detector or a person. Follow the sensor manufacturer's recommended setup and use a controlled safe release.
Enter measurements to calculate a fitted acceleration and quality-of-fit statistics.
Lab C • Physical projectile prediction and launch
Driving question: Can a measured launch speed, angle and height predict the landing position within experimental uncertainty?
Structured procedure:
- Define the horizontal landing plane as y=0. Measure release height and launch angle, including their reading uncertainties.
- Measure or independently estimate initial speed using a timing method or video analysis available in class; state the measurement technique.
- Before testing, solve y(t)=h+v₀sinθt−½gt² for the positive landing time; predict x=v₀cosθt.
- Launch at least five times from controlled conditions and record landing positions. Do not change launch settings between these repetitions.
- Calculate mean range, sample standard deviation, compare prediction with measurement and use uncertainty propagation as an evidence check.
Enter real observations and calculate the predicted range and measurement comparison.