Motion detector graph matching
Physically walk in front of a motion sensor to reproduce specified x–t and v–t graphs. Predict movements, record traces, interpret slopes and sign changes.
Write the lab reportOne physics model, three courses. Describe motion with graphs, components and projectiles; test predictions with motion detectors, Vernier fits and physical launches. Calculus appears only in the AP Physics C/ECE1401 pathway.
Honors and ECE1201 study the full 1D/2D and projectile sequence; only AP Physics C/ECE1401 requires calculus. All three complete the same physical labs. No forces, momentum, or energy methods are needed for this unit.
Use these notes as the primary compact text reference. Each lesson moves from a physical claim to a diagram, a mathematical model, and an explained problem. Attempt the concept check before opening the solution.
Position is measured relative to an origin. Displacement is final position minus initial position; it is a signed vector in one dimension. Distance is the length of the traveled path. If a runner goes 6 m east then 2 m west, distance is 8 m but displacement is +4 m east.
Average velocity is Δx/Δt, whereas average speed is total distance/elapsed time. Acceleration measures how velocity changes, so it can point opposite velocity when an object slows. A negative velocity alone does not mean slowing down.
A cyclist moves from x = −3 m to x = +9 m in 4 s, then returns to +5 m in 2 s. Displacement = 5 − (−3) = +8 m. Distance = 12 + 4 = 16 m. Average velocity = +8/6 = +1.33 m/s; average speed = 16/6 = 2.67 m/s.
What does a horizontal position–time graph tell you about velocity? A horizontal velocity–time graph?
Explanation: Horizontal x–t means position is constant, so velocity is zero. A horizontal v–t means velocity is constant, so acceleration is zero (even if velocity is not).
The slope of a position–time graph represents velocity. The slope of a velocity–time graph represents acceleration. A steeper position graph means a greater speed magnitude, not necessarily a positive velocity.
On a velocity–time graph, area above the time axis contributes positive displacement; area below contributes negative displacement. In algebra, use rectangles and triangles. In AP Physics C/ECE1401, interpret the same region as a definite integral.
Velocity rises linearly from −2 m/s to +4 m/s in 3 s. Acceleration = [4 − (−2)]/3 = 2 m/s². Signed displacement is the trapezoid area: ½(−2 + 4)(3) = +3 m, even though the object reversed direction.
If a graph crosses v = 0, must it also have zero acceleration? Explain.
Explanation: No. At the crossing v=0, the acceleration can still be nonzero; for a straight v–t line its slope stays the same.
Constant-acceleration equations are valid only when acceleration is constant during the interval. Identify initial conditions, signs, and the unknown before choosing the relation. Free fall near Earth is approximately constant acceleration when air resistance is negligible.
When velocity rises linearly, average velocity during the interval is (v₀+v)/2. Multiplying by time gives displacement; combining with v = v₀+at produces Δx = v₀t+½at². The familiar kinematics equations are different forms of one model, not unrelated formulas.
A cart starts at +3.0 m with velocity +2.0 m/s and constant acceleration −1.5 m/s². After 4.0 s: v = 2.0 − 1.5(4) = −4.0 m/s. Position x = 3 + 2(4) − 0.75(16) = −1.0 m. The negative final velocity means it has reversed.
When a problem gives distance traveled instead of displacement, how can a reversal change the calculation?
Explanation: Displacement is signed but distance is accumulated path length. If the object reverses, calculate the two path segments separately for total distance.
Two-dimensional motion is two one-dimensional problems connected by a common time. Decompose velocity into x and y components using sine and cosine, then solve each direction separately. The time is the same in both component equations.
For an angle measured above the positive horizontal, v₀ₓ = v₀ cosθ and v₀ᵧ = v₀ sinθ. Check quadrant and units. A negative component is directional information, not a negative speed.
A launch velocity has magnitude 16.0 m/s at 35°. Then v₀ₓ = 16 cos35° = 13.1 m/s and v₀ᵧ = 16 sin35° = 9.18 m/s. Write v⃗₀ = (13.1î + 9.18ĵ) m/s, then decide which acceleration applies to each direction.
Why does changing a projectile’s vertical velocity not automatically change its horizontal velocity?
Explanation: Gravity changes the vertical component because aᵧ=−g. The horizontal component has aₓ=0 in the ideal zero-drag model; both components share time.
In the ideal projectile model without air resistance, aₓ = 0 and aᵧ = −g. Write x(t)=x₀+v₀ₓt and y(t)=y₀+v₀ᵧt−½gt². Solve the vertical equation for the physically valid landing time; then use it in the horizontal equation.
At the highest point, the vertical velocity is zero, but the horizontal velocity is typically nonzero. The acceleration remains downward. The equal-height range shortcut does not apply to an elevated landing.
A ball leaves a 1.80 m platform horizontally at 5.00 m/s. With v₀ᵧ = 0, landing time t = √(2h/g) = √(3.60/9.80) = 0.606 s. Horizontal range R = 5.00(0.606) = 3.03 m. Check that gravity was used only in the vertical calculation.
Why is it incorrect to use the equal-height range formula for a launch from an elevated platform?
Explanation: The equal-height range expression assumes y_final=y_initial. When the landing height differs, solve the full vertical quadratic for time.
Velocity is always measured relative to an observer. Add velocities using labeled relationships: the boat’s velocity relative to shore equals its velocity relative to water plus the water’s velocity relative to shore.
When two motions have perpendicular directions, add component vectors and compute the magnitude only at the end. A current changes the resulting path and may change travel time depending on the direction the boat is pointed.
A boat points across a river at 3.0 m/s relative to water while the current is 1.5 m/s downstream. Relative to shore, v⃗ = (3.0î + 1.5ĵ) m/s, speed √(9+2.25) = 3.35 m/s, 26.6° downstream from straight across.
Would two observers moving at constant velocity relative to one another agree on acceleration?
Explanation: Yes, if reference frames differ by constant velocity. Their measured velocities differ by a constant, so both measure the same acceleration.
A linear fit x = A + Bt represents constant velocity, where B has units of m/s. A quadratic fit x = A + Bt + Ct² represents constant acceleration, where a = 2C. This coefficient comparison uses algebra and is appropriate for all three pathways.
Scatter and standard deviation describe repeatability, but do not automatically account for sensor calibration bias, parallax, a poor release method or model mismatch. Report measurement resolution, the fit coefficient, fit residuals, and whether the model is physically plausible.
Honors/ECE1201 explain the meaning of linear and quadratic coefficients without differentiating or integrating. AP Physics C/ECE1401 differentiates position fits to predict velocity, fits v(t) for acceleration, and uses the Vernier integral tool to compute a signed displacement from velocity.
A quadratic regression returns y(t) = 0.85 + 3.10t − 4.86t² (SI). Initial upward speed is 3.10 m/s. Vertical acceleration = 2(−4.86)=−9.72 m/s², giving 0.82% relative error from 9.80 m/s². The agreement must still be judged against uncertainty and calibration.
How might a calibration offset affect a fit’s intercept without changing its curvature?
Explanation: A constant position offset changes A but not B or C in x=A+Bt+Ct². A scale calibration error, unlike an offset, can bias the curvature as well.
Derivatives describe instantaneous rates of change and integrals accumulate signed change. The calculus adds reasoning power when acceleration is not constant; it does not replace a coordinate diagram or physical assumptions.
Example: x(t) = 2 + 3t² − 0.5t³ (SI units). Then v(t) = 6t − 1.5t² and a(t) = 6 − 3t. At t = 2 s, v = 6 m/s while a = 0 m/s². A moment of zero acceleration need not mean zero velocity.
If a(t) = 2t and v(0)=1 m/s, then v(t) = 1+t². Over 0–3 s, displacement is ∫(1+t²)dt = [t+t³/3]₀³ = 12 m.
2D calculus: differentiate each component of r⃗(t) separately. For a projectile with constant a⃗=(0,−g), integrate twice and apply x(0), y(0), vₓ(0), vᵧ(0).
Change launch parameters, then inspect the evolving trajectory, horizontal and vertical position, velocity, and acceleration. The colored arrows visualize instantaneous components; changing a parameter changes the drawing AND calculations. This is a zero-drag model for all courses. Physical launches remain the required lab.
Coordinate convention: x right, y up, g positive magnitude downward. Results are exact for the stated ideal model and are not measurements or estimates of uncertainty.
Physically walk in front of a motion sensor to reproduce specified x–t and v–t graphs. Predict movements, record traces, interpret slopes and sign changes.
Write the lab reportUse a motion sensor, track or ball motion where appropriate, record positions and velocities, and estimate acceleration using fitted motion functions and repeat trials.
Analyze and reportMeasure a physical launch height, speed, angle, flight time and range. Test a model and quantify uncertainty. This is the first measurement checkpoint in the long-term launcher project.
Open reportGraph shape, algebraic slopes, linear/quadratic best-fit coefficients, repeatability, uncertainty and CER.
Same apparatus and data; more rigorous fit residuals, dimensional analysis, standard deviation, parameter uncertainty and reproducible methods.
Same apparatus and data; derivatives of fit functions, measured versus derived velocity, signed numerical integration in Vernier, uncertainty in model parameters.
Previous virtual materials are preserved: motion detector/gravity sandbox and advanced projectile sandbox. The latter contains drag extensions; those are AP Physics C/ECE1401 only and are not required in this unit for ECE1201 or Honors. The legacy AP calculus kinematics page remains available as supplementary reading.
In Unit 1, students design an initial launcher concept and predict a target landing position from measured launch conditions. They must not rely on spring-force calibration, work–energy, or impulse yet. The launcher will be refined in later units.
Sketch launch point, coordinate axes, height, intended angle and landing region. Identify where the projectile is observed.
Use v₀ₓ, v₀ᵧ, height and g to determine time and range; test several physical launches and report spread.
Explain how launch-angle consistency, starting-height measurement and landing-position uncertainty affect predictions.
The Unit 2 checkpoint adds forces, free-body diagrams, and Hooke's-law calibration. Unit 3 adds energy and launcher performance modeling.