Explore interactions, explain motion with Newton's laws, and test physical models with measurements. Choose your course pathway to reveal the right mathematical depth.
AP Physics C/ECE1401: calculus-based models, differential equations, and drag/variable-force analysis.
The choice also controls the practice and lab options. Drag and nonlinear variable-force modeling appear only in AP Physics C/ECE1401. Linear spring calibration is common to all three courses.
Historical inquiry • evidence, power, and authority
Newton's laws in a changing world
How can mathematical laws change the way people think about authority?
Isaac Newton was born into a farming family and, through his mathematical work and later public appointments, achieved remarkable intellectual and social standing. His Principia (1687) explained how a small collection of mathematical principles could account for movements on Earth and in the heavens. Students will test how far that way of reasoning could influence—and how far it differs from—the political and religious debates of the seventeenth and eighteenth centuries.
Important: Newton did not cause the American Revolution. His work contributed to a wider culture of reason and empirical inquiry; disputes over constitutional power, colonial rights, religion, and economics had separate histories. Likewise, John Tillotson was not Newton's correspondent: he belongs to the broader English religious and intellectual context.
Primary source • 1687
Newton, Principia: laws of motion
“Every body perseveres in its state of rest”
From the English translation of Law I. The first law challenges the intuitive idea that a continuing push is required to keep an object moving. Read Laws I–III and identify which assertions are definitions, predictions, or testable generalizations.
“To every action there is always opposed an equal reaction”
Newton describes interactions between bodies. Students should evaluate—not assume—that this physical reciprocity can be used as an argument about relationships among people and governments.
A physical law is not itself a law of political rights.
Primary source • added 1713
The General Scholium
“I frame no hypotheses”
Newton distinguished a mathematical description supported by observations from an unverified explanation of gravity's ultimate cause. The later text also makes explicit theological claims. Compare what he knew empirically with what he believed metaphysically.
William M. Spellman interprets Tillotson's Latitudinarian Christianity as encouraging reasoned examination within continued religious commitment—not modern secularism. Tillotson's language and methods helped make reason respectable in religious discourse; his beliefs retained traditional ideas about sin and grace.
Read and annotate: Which statements in Newton's laws can be tested with a physical experiment? Underline a prediction and identify its assumptions.
Compare: According to Spellman's discussion of Tillotson, how could reason support faith rather than replace it? How does Newton's General Scholium complicate the claim that Newtonian science was simply anti-religious?
Historical context: Newton defended Cambridge University against King James II's interference in 1687; explain why the dispute was about institutional law and authority, not a physics experiment.
Argument with limits: Make a claim about how success in natural philosophy may have encouraged confidence in rational inquiry in political life. Give one piece of evidence and one limitation or alternative explanation.
Source note. The original 1687 edition did not contain the 1713 General Scholium. The familiar modern formula F = ma is a later expression of Newtonian dynamics, not the literal text of the Principia's second law.
01
Concept primer • for all three courses
What is a force? What is net force?
Force is an interaction, not a property stored inside an object
A force is a vector describing an interaction in which one object pushes, pulls, attracts, or otherwise acts on another object. Forces have magnitude (newtons, N) and direction. Contact forces include the normal force, friction, and tension. Long-range forces include gravity. A free-body diagram shows all external forces acting on one chosen system, not the forces that system exerts on others.
Net force is the vector sum of all external forces acting on the chosen system. It is not an extra force to draw. For a constant-mass object in an inertial reference frame, Newton's second law says its acceleration points along that vector sum:
Fnet = Σ Fexternal = ma
In the displayed equation, bold letters denote vectors. Resolve the vector equation into components: ΣFx = max and ΣFy = may. If net force is zero, acceleration is zero; the object may remain at rest or continue at constant nonzero velocity.
Choose the system
Circle the body or combination of bodies you are analyzing. An interaction between two bodies inside a combined system is internal and does not appear in its external-force sum.
System → Force sources → Free-body diagram → Components → Equations → Units and limits
Newton's laws in plain language
First: no net external force means no acceleration. Second: the net external force determines acceleration. Third: an interaction creates equal-magnitude, oppositely directed forces on different objects.
Neither the normal force nor tension automatically equals weight; calculate from the chosen object's equations.
Force vectors versus changing speed
A component of net force parallel to an object's velocity changes its speed at that instant; a perpendicular component changes the direction of velocity. A force initially perpendicular to velocity will not necessarily stay perpendicular as motion evolves. The relevant circular-motion condition is that the net inward force is perpendicular to velocity at each instant.
This distinction applies to all pathways and does not require the momentum or energy units.
Use these notes as the unit's short reference text. Each lesson explains the physical idea, models a force diagram, works one original problem, and names a mistake to watch for. The simulations and practice bank below let you test the model. Only Newtonian forces and earlier kinematics are required here—no energy, impulse, or momentum methods.
1. Name the system2. Sketch each external force3. Choose axes4. Write ΣF = ma by component5. Solve and interpret
Illustrations are schematic: arrows show directions and the relevant interactions, but lengths are not to scale unless an example explicitly states otherwise. In interactive simulations below, changing arrow lengths reflect changing modeled force magnitudes.
LESSON 2-1 · ALL COURSES
What forces act on this object?
Represent every external interaction on one selected object before trying any algebra.
When you push a crate, the crate does not “contain” a push. The force exists because another object—the hand—interacts with it. Gravity comes from Earth's attraction; the floor supplies a normal force perpendicular to its surface and friction parallel to it. A free-body diagram (FBD) replaces the crate with a point or small box and draws only the forces acting on that chosen crate.
The net force is the vector sum of all those external forces. It is not a separate arrow added to the diagram. Two forces in opposite directions partly or fully cancel in their sum; forces at angles must be resolved into components.
ΣF = F1 + F2 + … ΣFx = max, ΣFy = may
How to begin: name the system, list every object interacting with it, draw one force for each interaction, and then select axes. Forces exerted by the crate belong on another object's diagram.
Figure 2.1. First isolate the crate; then show only forces acting on it. The rightward 30 N push and leftward 6 N friction are not a third-law pair.
What the diagram means: gravity and the normal force balance vertically, but the horizontal push exceeds friction. Therefore the crate accelerates rightward even if it was initially moving in another direction.
Worked example · a crate being pushed on a floor
A 6.0 kg crate experiences a 30 N push right and 6.0 N friction left. The floor is horizontal; vertical acceleration is zero.
From the FBD: ΣFy = N − mg = 0, so N = (6.0)(9.8) = 58.8 N.
Horizontally: ΣFx = 30 − 6.0 = 24 N.
Newton’s second law: ax = (24 N)/(6.0 kg) = 4.0 m/s² right.
Check: acceleration points in the direction of the net force, not necessarily the direction of velocity.
Modeling checkpoint
An FBD must identify the source of each force. If an object is sitting motionless on a table, does the table supply an extra upward “net force,” or a normal force that balances gravity?
Relate force to acceleration and separate action–reaction pairs by system.
First law (inertia). In an inertial reference frame, an object at rest stays at rest and an object moving with constant velocity continues that way if the net external force is zero. It need not be stationary. Constant speed in a turn is not constant velocity because direction changes.
Second law. For constant mass, acceleration points with the net force and has magnitude a = |ΣF|/m. Double the net force with mass fixed: acceleration doubles. Double the mass with net force fixed: acceleration halves. A larger mass measures greater inertia, not automatically a larger applied force.
ΣF = ma (constant mass)
Third law. If A pushes on B, B pushes on A with equal magnitude and opposite direction at the same instant. These forces do not cancel on a single FBD because they act on different objects. Write the object names in each label: “A on B” and “B on A.”
Figure 2.2. Third-law interaction forces act on different carts. They cannot cancel in the free-body diagram of one cart. Other forces are omitted to isolate the pair.
Two types of balance: Newton's third-law equal-and-opposite pair never goes into one body's net-force sum. Balanced forces on one body often come from two entirely different interactions, such as gravity and a floor's support.
Worked example · compare acceleration when mass changes
A constant horizontal net force of 18 N acts on an object of mass 3.0 kg. Its acceleration is a = 18/3.0 = 6.0 m/s².
Keeping the same net force, change the mass to 9.0 kg: a = 18/9.0 = 2.0 m/s².
The applied net force did not become smaller; the same force produces less acceleration on more mass.
Quick ratio check: tripling mass at constant net force makes acceleration one-third as large.
Modeling checkpoint
Do the equal-and-opposite contact forces between two colliding carts make the carts accelerate equally? Explain why the forces match even when masses and accelerations differ.
Choose useful axes, separate weight into components, and decide whether friction is static or kinetic.
On a ramp, gravity still points vertically downward. Resolving weight into components along and perpendicular to the surface makes the force equations shorter. Choose +x uphill and +y outward from the surface. For a block that does not leave the ramp, ay = 0.
Fg,∥ = mg sinθ Fg,⊥ = mg cosθ
The normal force equals mg cosθ only if there are no other forces with perpendicular components and no perpendicular acceleration. A person pushing into the ramp, a rope lifting away, or a curved surface changes N.
Static friction adjusts to whatever magnitude is required to prevent slipping, up to μsN. It does not always equal μsN. Kinetic friction on an object sliding along the surface has magnitude approximately μkN, opposite the relative sliding direction. At the instant a resting block begins to slide, mg sinθ = μsmg cosθ, giving tanθc = μs under these assumptions.
Figure 2.3. Gravity remains vertical. Its components depend on the chosen tilted axes; they are not additional forces to add to mg. The red component is downslope.
Diagram discipline: do not draw the weight and its components as three additional real forces. Components are a mathematical replacement for the original weight when summing along your tilted axes.
Worked example · a sliding block on a ramp
A 5.0 kg block slides down a 30° slope with μk = 0.20. Keep +x uphill, as in the diagram.
Perpendicular balance: N = mg cos30° = (5.0)(9.8)(0.866) = 42.4 N.
Kinetic friction is uphill: fk = μkN = 0.20(42.4) = 8.49 N.
With uphill positive: ΣFx = fk − mg sin30° = 8.49 − 24.5 = −16.0 N.
Create separate FBDs and connect their motions with the string constraint.
When two objects are connected by a taut, nearly massless cord passing over an ideal pulley, their displacement and acceleration magnitudes are linked. The rope pulls each mass toward the pulley. For an ideal massless rope and frictionless pulley the tension has the same magnitude at both ends; that assumption must be stated.
Do not put forces from both masses onto one object’s free-body diagram. Instead, write one net-force equation per object, choose each positive direction to agree with the anticipated motion, and use the common acceleration magnitude to solve the equations together.
m1: T − m1g = m1a m2: m2g − T = m2a
The same logic works for a block on a table connected to a hanging mass or for two bodies on inclines. If the cord stretches, slips, or the pulley has appreciable inertia, the constraint and/or tension relationship needs a more detailed model.
Figure 2.4. For each mass, write a separate force equation. The string constraint gives equal acceleration magnitudes, not equal individual net forces.
Choose consistent signs: for a heavier right mass moving downward, take down as positive for it and up as positive for the lighter left mass. Then both equations use the same positive acceleration value.
Worked example · two masses on a pulley
Masses 3.0 kg and 5.0 kg hang on opposite sides of an ideal pulley. The 5.0 kg side moves down.
Write 3.0 kg mass: T − 3g = 3a. Write 5.0 kg mass: 5g − T = 5a.
Add the equations to eliminate tension: (5 − 3)g = (5 + 3)a.
a = (2/8)(9.8) = 2.45 m/s². Then T = 3(9.8 + 2.45) = 36.75 N.
Tension is neither 3g nor 5g because both masses accelerate.
Modeling checkpoint
Before calculating, predict what happens to acceleration when the hanging masses approach the same value. Does your equation agree?
Interpret a spring's restoring direction and use a force–extension graph to measure stiffness.
A spring deforms when stretched or compressed. If its restoring force is approximately proportional to displacement from equilibrium, it obeys Hooke’s law. The minus sign means the spring’s force points toward equilibrium. If x is positive rightward for extension, the spring pulls left.
Fspring = −kx (x from equilibrium; k in N/m)
For calibration, apply a known external holding force and measure extension. When the spring is held stationary on a low-friction horizontal track, the holding force has equal magnitude and opposite direction to its spring force. Graph holding force magnitude against extension: the slope is k. Use several measurements and a best-fit line rather than relying on a single trial.
Report the zero point, ruler precision, repeated-measurement spread, and uncertainty in the fitted slope. A large or nonlinear extension can violate the Hooke’s-law approximation; the data should determine whether the linear model is reasonable. All three courses perform the calibration; solving motion under a spatially varying force by calculus belongs to the AP Physics C/ECE1401 extension or the later energy unit.
Figure 2.5. The red restoring force points toward equilibrium; the right-hand graph is the external holding-force magnitude used for a spring calibration.
What force are you graphing? The spring’s force versus signed extension has slope −k. The external holding force versus extension has slope +k. Do not confuse the two graphs.
Worked example · measure a spring constant
A spring on a low-friction track stretches 0.120 m when held by a 19.2 N horizontal force. Assume the relationship is linear in this range.
At equilibrium, the spring’s leftward force has magnitude 19.2 N. Apply Fhold = kx.
k = (19.2 N)/(0.120 m) = 160 N/m.
Predict a second measured point: at x = 0.075 m, Fhold = 160(0.075) = 12.0 N. Compare prediction against data.
For an actual lab, the best-fit slope across multiple force–extension points is preferable to a one-point estimate.
Modeling checkpoint
Why does the spring return toward equilibrium when released, even though the calibrated graph has a positive slope?
Identify the real inward interaction that bends the velocity vector.
Even if speed remains constant, an object moving around a circle accelerates because its direction changes. Its instantaneous velocity is tangent to the circle. The acceleration is inward, toward the center, with magnitude v²/r for steady circular motion.
ar = v²/r ΣFinward = mv²/r
Centripetal force is not an additional kind of force. The phrase means the net inward component of real interactions. On a flat road, friction can supply it; a swinging mass receives it from a component of tension; a satellite receives it from gravity. The correct question is “which actual force points inward?”
For two spherical bodies outside one another, the gravitational attraction has magnitude Gm1m2/r² and points along the line connecting their centers. For a circular satellite orbit around a much more massive body, gravity can supply the full inward net force; equating the two lets you determine orbital speed without using energy.
GmM/r² = mv²/r ⇒ v = √(GM/r) (circular orbit)
For a vehicle on a level road with no vertical acceleration, N = mg. To avoid slipping, required inward static friction cannot exceed μsN.
Figure 2.6. The friction arrow changes the direction of the velocity; normal force and weight balance vertically. There is no additional force labeled “centripetal force.”
Reading a circular-motion FBD: the red arrow at the car points toward the circle’s center; the green velocity arrow is tangent. In a rotating system, never add a fictitious “centripetal force” on top of the real inward forces.
Worked example · friction-limited curve on flat pavement
A vehicle rounds a level curve of radius 22 m at 12 m/s. Determine the minimum coefficient of static friction needed to avoid lateral sliding.
Vertical net force is zero: N = mg. The required inward force is fs = mv²/r.
At the limiting condition fs,max = μsmg = mv²/r. Mass cancels.
μs,min = v²/(rg) = 144/(22×9.8) = 0.668.
Doubling speed requires four times the inward force at the same radius. Mass cancellation is specific to this idealized flat-road model.
Modeling checkpoint
If friction vanishes suddenly, will the vehicle keep moving on the circle, fly radially outward, or move along the instantaneous tangent? Explain using Newton’s first law.
AP calculus extension: motion under a changing force
Derive a(t), v(t), and x(t) from a force model rather than inserting a constant acceleration.
A variable force generally produces variable acceleration. The constant-acceleration kinematics formulas from Unit 1 no longer apply directly. Instead, start from a chosen system and its net-force equation, use a = dv/dt, and integrate using the initial conditions. An experimentally determined force law is only as good as the assumptions and measurement range that support it.
Model A · time-dependent driving force
F(t) = ct ⇒ dv/dt = ct/m
If the object starts at rest at the origin, integrating twice gives v(t) = ct²/(2m) and x(t) = ct³/(6m). Note that c has units N/s. A graph of acceleration rises linearly, velocity is quadratic in time, and position is cubic in time.
Model B · linear velocity-dependent drag
For a body falling downward at speed v, define downward positive. Weight is +mg and drag is −bv. Drag starts at zero when released from rest, then grows as velocity grows.
m dv/dt = mg − bv ⇒ dv/(g − (b/m)v) = dt
Integrate both sides: −(m/b)ln|g − (b/m)v| = t + C. After exponentiating, applying v(0)=0, and solving for velocity, v(t) = (mg/b)(1 − e−bt/m). Here mg/b is the terminal speed and m/b is a characteristic time. Because acceleration tends toward zero, velocity tends to a constant rather than increasing without bound. The quadratic-drag laboratory treats Fd proportional to v² as a different candidate model and compares measured residuals. This lesson and lab are exclusive to AP Physics C/ECE1401.
Figure 2.7. A known time-dependent force gives a time-dependent acceleration. With linear resistance, acceleration shrinks as velocity approaches terminal speed.
Graph check: with F(t) = ct, the force and acceleration increase; for linear drag, net force and acceleration decrease as velocity increases, approaching zero at terminal speed.
Worked example · derive a position function from nonuniform force
A 2.0 kg glider on a frictionless track experiences a horizontal net force F(t) = (4.0 N/s)t, for t ≥ 0. At t = 0, v = 0 and x = 0.
ΣF = ma gives dv/dt = (4.0/2.0)t = (2.0 m/s³)t.
Integrate: v(t) = ∫(2.0 m/s³)t dt = (1.0 m/s³)t² + C. Initial rest means C = 0.
Integrate again: x(t) = ∫v dt = (1/3 m/s³)t³ + D. Initial position means D = 0.
At t = 3.0 s: v = 9.0 m/s and x = 9.0 m.
At t = 0 the force and acceleration are zero, but both increase afterward; constant-acceleration formulas would fail here.
Modeling checkpoint
The drag terminal-speed expression requires b > 0 and steady downward motion. Check its units (m/s), its t = 0 limit, and its large-t limit before using it.
Putting the chapters to work: Sketch the force model before adjusting any slider in the Force Modeling Studio, then compare your predicted vector directions with the animated display. For independent practice and step-by-step feedback, open the original Unit 2 MCQ and FRQ bank. Laboratory write-ups are linked in the physical inquiry sequence.
03
Original worked examples • diagram → law → result → interpretation
Fully explained force-modeling problems
Example 1 • All courses
Elevator: why a scale changes its reading
Scenario. A 65 kg passenger stands on a scale in a lift accelerating upward at 1.8 m/s². Determine the reading and compare it with the reading while moving at constant velocity.
Isolate: the passenger. Forces are scale's upward normal force N and Earth's downward gravitational force mg.
Model: choose upward positive. ΣFy = N − mg = ma.
Solve: N = m(g+a) = 65(9.81+1.8) = 755 N (rounded).
Interpret: at constant upward or downward velocity, a=0, so N=mg ≈ 638 N. A larger scale reading reflects acceleration, not a change in gravitational weight.
Check: If the lift accelerates downward at 1.8 m/s², the reading falls to 65(9.81−1.8) ≈ 521 N.
Example 2 • All courses
Three forces: find the missing balancing pull
Scenario. A small ring is held at rest by three horizontal cable forces. The first is 22 N east. The second is 5 N west and 12 N north. Find the third force's components, magnitude, and direction.
Equilibrium: since the ring remains at rest, ΣF⃗ = 0⃗.
Add known pulls: (22,0) + (−5,12) = (17,12) N.
Balance: F⃗₃ = −(17,12) = (−17,−12) N.
Magnitude: |F⃗₃| = √(17²+12²) ≈ 20.8 N.
Direction: 35.2° south of west, or 215.2° counterclockwise from +x.
Always check both ΣFx=0 and ΣFy=0; canceling only one component is insufficient.
Scenario. A car negotiates a level circular road of radius 55 m. The maximum available coefficient of static friction is 0.55. Find the greatest speed before skidding, assuming a steady circular path.
Identify the source: static tire-road friction is the horizontal inward net force; there is no separate 'centripetal-force' arrow.
Vertical balance: N−mg=0, so N=mg.
Radial law: fs=mv²/r with fs,max=μsN.
At the limit: mv²/r=μsmg → vmax=√(μsgr).
Result: √(0.55×9.81×55)=17.3 m/s.
The mass cancels for this ideal model. The coefficient of static friction describes a maximum; actual friction below the limit is as needed.
Example 4 • All courses; extended AP reasoning
Rotational tension: a conical pendulum
Scenario. A 0.35 kg instrument hangs on a 1.8 m string and moves in a horizontal circle, remaining 35° from vertical. Determine tension and speed.
Free-body diagram: only two forces act on the instrument—tension T along the string, and weight mg vertically down.
Vertical equilibrium: Tcosθ−mg=0 → T=mg/cosθ.
Evaluate: T=(0.35×9.81)/cos35° ≈ 4.19 N.
Horizontal radial law: Tsinθ=mv²/r, where r=Lsinθ.
Solve: v=√(gLsinθ tanθ) ≈ 2.66 m/s.
Notice why speed does not depend on instrument mass, although tension does. Never use T=mg when the string is tilted.
Example 5 • AP Physics C/ECE1401 ONLY
Derive motion from a nonuniform force F(t)
Scenario. A 1.50 kg glider is initially at rest on a frictionless track. An actuator applies F(t)=3.0(1+t/2) N for 0≤t≤2.0 s. Find a(t), v(t), and x(t) from x(0)=0.
Model: m(dv/dt)=F(t), so a(t)=(3.0/1.50)(1+t/2)=2+t m/s² when t is in seconds.
Integrate acceleration: v(t)=∫(2+t)dt=2t+t²/2+C. Use v(0)=0 to find C=0.
Integrate velocity: x(t)=∫(2t+t²/2)dt=t²+t³/6+D. Use x(0)=0 to find D=0.
Check t=2 s: v(2)=6.0 m/s; x(2)=4+8/6≈5.33 m.
Interpret: force and acceleration rise linearly; velocity bends upward; position curves more strongly. After the actuator switches off, velocity becomes constant. The diagram is qualitative; force and velocity use separate vertical scales.
The derivation comes entirely from Newton's second law and the calculus of motion.
Example 6 • AP Physics C/ECE1401 ONLY
Linear resistive force: use a separable differential equation
Scenario. A mass m is released from rest and falls vertically. Take downward positive; resistance has magnitude bv and points upward while the mass falls. Derive v(t).
Choose signs: m(dv/dt)=mg−bv.
Separate variables: dv/(g−(b/m)v)=dt.
Integrate with initial conditions: −(m/b)ln|1−bv/(mg)|=t (valid on this release-from-rest trajectory).
Solve:v(t)=(mg/b)[1−e−bt/m].
Physical checks: v(0)=0, dv/dt at zero is g, and v approaches the terminal value mg/b as t increases. The characteristic response time is τ=m/b.
If the resistance is proportional to v² instead, the differential equation changes. Students should not reuse this exponential solution for quadratic drag.
Sequencing boundary: This unit uses Newton’s laws, acceleration, equilibrium, friction, tension, circular motion, gravitation, and (1401 only) variable-force differential equations. Later units address additional conservation laws.
01B
Represent → reason → solve → test
Force modeling studio
The algebra and calculus pathways use the same starting method: identify the system, draw the interactions, choose axes, write force components, and only then solve. These new, original models build from common class-note themes without reproducing assessment questions.
1. Isolate the system2. Identify force sources3. Choose axes4. Write ΣF = ma by axis5. Test assumptions & limiting cases
Model A • All courses
Who supports whom? Stacked normal forces
Three blocks are motionless on a horizontal floor. Adjust their masses and select the contact surface. A normal force is exerted by one surface on an object; it is not automatically the weight of that object.
N(B on C) = 19.6 N upward
The top contact supports block C only.
Why don't third-law partners cancel the same free-body diagram?
For example, B pushes upward on C, while C pushes downward on B. These equal-magnitude forces act on different objects, so they cannot cancel when you isolate just C or just B.
Model B • All courses
Can an applied force push a load up a ramp?
Assume a frictionless ramp and a force applied parallel to its surface. Change the slope, mass, and maximum push. Calculate the force needed to hold constant speed and the maximum feasible ramp angle.
Required push = —
—
Derive the threshold condition
At zero acceleration along the incline, ΣF∥ = Fpush − mg sinθ = 0. Thus Frequired = mg sinθ. If Fmax < mg, θmax = sin−1(Fmax / mg). If Fmax ≥ mg, this ideal model can support any ramp angle up to vertical. When sliding friction is introduced later, its force must also be accounted for.
Model C • All courses
Does a force change speed or direction?
The velocity points right. Rotate the net-force vector relative to the instantaneous velocity; compare acceleration along and perpendicular to motion. The calculator reports force components, not a new future trajectory.
Tangential acceleration = —
—
Important distinction: A force perpendicular to velocity changes direction without changing instantaneous speed. If the applied force remains fixed in space, velocity can develop a component along it afterward, and speed may then change. In uniform circular motion, the net force remains perpendicular at every instant.
Model D • AP Physics C/ECE1401 only
From a free-body diagram to v(t)
Suppose a body starts from rest and slides down a frictionless incline. Positive is down the slope, and the drag force acts up the slope with magnitude bv.
m dv/dt = mg sinθ − bv
Find the terminal speed by setting dv/dt = 0:
vT = mg sinθ/b
View the complete separation and integration
Rearrange: dv/(vT − v) = (b/m)dt.
Integrate: −ln|vT − v| = bt/m + C.
Use v(0) = 0 and solve: v(t) = vT[1 − e−bt/m].
Define the time constant τ = m/b. Check t = 0, t → ∞, and b → 0.
Terminal speed = —
—
A proportional-to-v² model is a separate hypothesis, not interchangeable with this linear-ODE solution. Compare the competing force models using actual lab data and residuals in the 1401-only lab.
Classroom whiteboard protocol: For every scenario, ask students to (a) draw the system before its FBD, (b) identify the object exerting each force, (c) write component equations before numbers, and (d) explain whether their answer makes sense at a limiting value such as θ = 0°, F = 0, or a = 0.
02
Interactive model • change one variable at a time
Inclined plane and friction explorer
Idealized plane: object begins at rest, no air drag, gravity 9.81 m/s². The model checks whether static friction can prevent slipping.
Parallel gravity—
Normal force—
Friction applied—
Acceleration—
Predict → adjust → explain. Why does increasing mass scale both gravity and normal force, yet not change the idealized critical angle? Compare your reasoning against the model and the physical ramp experiment.
03
Original practice • not drawn from supplied exams
Develop a force-modeling habit
For each problem: (1) diagram the system, (2) state axes and assumptions, (3) write a symbolic net-force equation, (4) substitute values, and (5) evaluate units and the result.
Practice A · Ramp start
A 4.0 kg block is released from rest on a 28° ramp. The coefficients are μs = 0.40 and μk = 0.24. Predict whether the block moves and calculate its initial acceleration.
Show method and answer
mg sinθ ≈ 18.4 N; N ≈ 34.6 N; maximum static friction ≈ 13.9 N. The block slides. a = g(sinθ − μkcosθ) ≈ 2.53 m/s² down the ramp.
Practice B · Two connected masses
Two masses, 2.5 kg and 3.5 kg, hang on opposite sides of an ideal pulley. Predict the direction of motion. Find their acceleration and the rope tension.
Show method and answer
The 3.5 kg mass descends. a = [(3.5−2.5)/(3.5+2.5)]g ≈ 1.64 m/s². T = 2.5(g+a) ≈ 28.6 N.
Practice C · Critical angle
A block begins to slide when a ramp reaches 31°. Estimate μs. Explain why repeating this test with a heavier block need not change the result.
Show method and answer
At the threshold mg sinθ = μsmg cosθ, so μs = tan31° ≈ 0.601. Mass cancels in this ideal model.
Practice D · Spring calibration
A sensor reads 1.80 N when a spring is stretched 0.060 m. Find the spring constant and predict the force magnitude at 0.085 m, assuming the spring stays linear.
Show method and answer
k = F/x = 30.0 N/m; force magnitude at 0.085 m is 2.55 N.
Practice E · Linear drag
A 0.40 kg object is released vertically from rest. With downward positive, drag is Fd = −(0.12 kg/s)v. Set up the differential equation and derive an expression for v(t).
Video analysis of a falling object provides velocity and acceleration data. Describe how you would use Fd = mg − ma and two candidate regressions to determine whether force is proportional to v or v². Which diagnostic would you examine besides the correlation?
Show method and answer
Compute drag force from measured acceleration for each instant, fit Fd=bv and Fd=cv² consistently, then compare residual patterns and error metrics. Consider uncertainty and physical plausibility; a fit alone does not prove the drag law.
New • Expanded exam preparation
Original MCQ & FRQ problem bank
Prepare for the different question demands of AP Physics C/ECE1401 and ECE1201/Honors. The bank includes 12 multiple-choice questions per pathway, four free responses per pathway, and an additional calculus-based ECE crossover challenge. Every solution opens step by step.
All public questions are independently written. No provided ECE test or restricted College Board question is published here.
04
Physical inquiry → web-based report
Unit 2 laboratory sequence
Lab A • All courses
Test Newton's second law
Measure a cart's acceleration under controlled net forces, document assumptions, and compare an F–a model with observed measurements and propagated uncertainty.
Determine a spring constant from repeated mass–extension measurements and discuss precision, resolution, and uncertainty in the slope or per-trial estimate.
Unit 1 bridge (especially 1401): motion sensor and ramp data, quadratic regression of position, calculus interpretation of acceleration, and a reasoned explanation of gravitational mass independence. Original student exams are not included in this page or its downloads.
Continue the launcher-design project introduced during Unit 1. Do not require a completed energy model yet. At this checkpoint students should identify forces, explain how the launcher accelerates its projectile, and determine what measurements will be needed to test their assumptions.
Sketch and label the launcher, projectile, compression region, and release path.
Draw a free-body diagram during launch and after release; name contact forces.
Measure spring compression and estimate the linear spring constant, with uncertainty.
State which quantities are measurable now and which predictions require Unit 3's work–energy methods.
Complete a peer design review and record at least one justified revision.
Submit this checkpoint
Diagram: labeled mechanism and free-body diagram.
Model: symbolic ΣF = ma and a force–displacement calibration if using a spring.
Evidence: preliminary measurements, uncertainty, and controlled variables.
Revision: peer feedback and a specific next test.
The later energy and momentum units will complete the launcher model. Full range prediction and repeated accuracy trials belong to the culminating design phase.
Unit 2 resource checklist
The website supplies lesson summaries, original practice, virtual illustrations, and physical-lab write-ups. The student workbook provides STRIDES notes, diagram space, course-specific practice, and lab worksheets. Faculty worked answers and original-exam guidance are maintained separately from the public website.