Welch · Physics
AP Physics C/ECE1401 · Physical inquiry

Water-jet calibration & Bernoulli model

Guided laboratory with student-chosen procedure details, repeated physical measurements, model predictions, propagated uncertainty, and a complete web-based report. Save or print to PDF.

hHhorizontal range R
The water exits approximately horizontally. Use Bernoulli for launch speed and projectile motion for horizontal range.

Purpose, apparatus, method and measurements

Safety: Use a plastic bottle only, with the aperture prepared by the instructor. No sharp tools in student hands. Keep water off electrical outlets and walking areas; wipe spills promptly. Catch water in a tray. No pressurized containers.

Question and physical prediction

Does the horizontal range of a water jet obey R² ∝ h when outlet height H is controlled? Derive the model from ideal Bernoulli and projectile kinematics before measuring.

Rideal=2√(hH)    Cv=R/Rideal    R²=(4H Cv²)h

Apparatus and measurement plan

Plastic bottle with one small horizontal opening, water, ruler or meterstick, paper markers, waterproof tray, tape; optional phone video to locate the first contact point. Measure outlet elevation H independently of water height h. Choose at least three water depths and perform three fast trials at each depth. Refill between measurements so each trial begins with a measured h.

Reported u(h) and u(H) are one-standard-uncertainty estimates. Range reading increment is the smallest marked division; the calculator uses its rectangular resolution limit only when repeat scatter is smaller, avoiding double-counting observed scatter.

Observed ranges (centimeters)

Height above hole hRange R₁Range R₂Range R₃
Enter measured data, then calculate.

Required reasoning

Derive Torricelli's result by canceling equal atmospheric pressures and identifying the negligible surface speed. Use projectile kinematics for the time of flight. Fit R² against h; interpret slope and intercept. Discuss whether range scatter and propagated input uncertainties are consistent with your model.

Scientific report

Calculations are a check on the measurements. Written justification and unit labels are required for a complete ECE-level lab report; export data before leaving the page.