Read → diagram → derive → test
Work through fluid density and pressure first, then use control-volume reasoning and energy per volume to explain flow. After reading a model, predict the outcome of the interactive test before moving sliders.
Each lesson includes labeled figures, physical assumptions, an explained model, a worked numerical or symbolic problem, and a concept check with an expandable answer. All sections are at the ECE1401 level.
Density, pressure, and fluid systems
Start each model by naming the system and its boundary. A fluid has no fixed shape under shear; liquids and gases move in response to pressure differences and body forces. Density is an intensive property, while pressure is a scalar whose associated surface force points perpendicular to the surface.
In a static liquid, pressure at the same depth is equal in connected regions. A column of area A and depth h has weight ρgAh. Force balance gives the extra pressure ρgh, independent of the container shape.
For nonuniform density, balance a thin slab: dP/dz = −ρ(z)g for upward-positive z, then integrate the density distribution. This is the calculus extension of the familiar hydrostatic relationship.
Worked example · variable density
A stratified liquid has density ρ(h)=980+12h kg/m³ for downward depth h in meters. Find the gauge pressure 3.0 m below the surface.
- Take a depth slice: dP=ρ(h)g dh.
- Integrate from 0 to 3 m: ΔP=9.81∫₀³(980+12h)dh.
- ΔP=9.81[980(3)+6(3²)] = 29,371 Pa ≈ 29.4 kPa.
- The constant-density approximation would underestimate the pressure slightly.
Check your reasoning: Why does hydrostatic pressure not depend on the container width?
Pascal’s principle, buoyancy, and force balance
An imposed pressure change in a confined static liquid is transmitted throughout the fluid. A hydraulic press trades displacement for force: larger output area means larger output force, but smaller output displacement for ideal incompressible operation.
Buoyancy originates in unequal hydrostatic pressures at the bottom and top of a submerged body. The net upward force is the weight of displaced fluid. A floating body settles where that force equals its weight.
Free-body diagram: draw weight at the center of mass and buoyancy upward at the center of displaced volume. For equilibrium also check net torque if stability is in question.
Worked example · two-layer flotation
A 0.0500 m³ sealed float of mass 35.0 kg is completely submerged in freshwater (1000 kg/m³). What is the net upward force when released, neglecting drag?
- Buoyancy = (1000)(9.81)(0.0500)=490.5 N.
- Weight = (35.0)(9.81)=343.4 N.
- Net upward force = 147.2 N, so a = 147.2/35.0 = 4.20 m/s² upward initially.
- As the float reaches the surface and displaced volume decreases, acceleration changes; constant acceleration cannot be assumed throughout.
Check your reasoning: Does buoyant force always equal the weight of an object?
Continuity: conservation of mass
Choose a control volume around a pipe. For steady flow, the mass entering each second equals the mass leaving. Mass flux, not velocity alone, is conserved. If density is constant, the area–speed product remains constant.
Area is proportional to radius squared. Halving radius at fixed volume flow increases average speed by a factor of four. An actual pipe may also lose pressure through viscosity, which an ideal model neglects.
Worked example · mass-flow bottleneck
Water enters a 6.0 cm-diameter line at 1.8 m/s and exits a 3.5 cm-diameter nozzle. Find outlet speed and volumetric flow.
- A₁/A₂=(6.0/3.5)²=2.939.
- v₂ = 1.8(2.939) = 5.29 m/s.
- Q = (π/4)(0.060)²(1.8) = 0.00509 m³/s.
- The same Q passes every cross section under the stated steady incompressible assumption.
Check your reasoning: Does a narrowing pipe always give larger outlet volume flow?
Bernoulli: pressure, elevation, and speed
Bernoulli’s equation applies to steady, inviscid flow along a streamline, with no pump or turbine work between the points. Each term has units of energy per volume (Pa). Pressure can be converted into speed and elevation and vice versa.
Write the full equation at both locations before canceling terms. If the pipe rises while narrowing, both speed and elevation may increase, causing a larger pressure drop. Always check that the predicted absolute pressure remains physically reasonable.
Real pipes dissipate mechanical energy. The measured pressure drop may exceed the ideal prediction, especially in narrow or rough passages.
Worked example · raised nozzle
Water enters a horizontal line at 240 kPa, 2.0 m/s; it exits 1.5 m higher at 5.0 m/s. Ignore losses. Determine outlet pressure.
- Pressure change from speed: ½(1000)(2²−5²)=−10,500 Pa.
- Elevation term: (1000)(9.81)(0−1.5)=−14,715 Pa.
- P₂=240,000−10,500−14,715=214,785 Pa ≈ 215 kPa.
- Both higher speed and higher elevation require lower static pressure in this model.
Check your reasoning: Why does “faster flow always means lower pressure” need qualifications?
Deriving the bottle-jet prediction
For a large open container with a small outlet, both the water surface and opening are exposed to atmospheric pressure. Surface velocity is small compared with the exit speed. A streamline energy balance then predicts the horizontal exit speed.
Here h is the vertical depth of water above the opening and H is the height of the opening above the landing surface. They are different distances. The exiting stream may contract, experience turbulent losses, and slow as the water level falls.
Graphing R² versus h tests a predicted linear relationship. A slope smaller than 4H suggests a discharge-speed coefficient below one when other effects are controlled.
Worked example · predict and assess
A bottle opening is H=0.70 m above the floor; the water surface is h=0.16 m above the opening. Predict the ideal horizontal range.
- Outlet speed = √[2(9.81)(0.16)] = 1.77 m/s.
- Time = √[2(0.70)/9.81] = 0.378 s.
- R = (1.77)(0.378) = 0.669 m.
- For a measured R=0.61 m, Cᵥ≈0.91. Interpret that ratio carefully; it combines any systematic effects in your method.
Check your reasoning: Which two lengths should be measured independently?
Viscosity, model failure, and uncertainty
Real fluids resist shear. In laminar flow through a long cylindrical tube, Poiseuille’s law predicts extreme sensitivity of flow to radius; a 10% radius error can change a predicted flow rate substantially. The law fails when the assumptions of steady fully developed laminar flow are not met.
Reynolds number is a dimensionless measure of inertial to viscous effects; its interpretation depends on geometry and flow conditions. A straight pipe is often near transition for Re of order a few thousand, not at one universal threshold.
Distinguish random scatter in repeated landing ranges from systematic bias such as a tilted aperture or a falling water surface. Increasing the number of trials reduces uncertainty in a mean, not necessarily the bias.
Worked example · uncertainty propagation
A trial yields R=0.620±0.010 m, h=0.150±0.003 m, and H=0.650±0.005 m. Estimate Cᵥ and its standard uncertainty, assuming independent inputs.
- Rideal=2√(0.150×0.650)=0.6245 m and Cᵥ=0.9928.
- Relative uncertainty = √[(0.010/0.620)²+(0.003/0.300)²+(0.005/1.300)²]=0.01935.
- u(Cᵥ)=0.9928(0.01935)=0.0192.
- Report Cᵥ=0.993±0.019, then discuss whether repeated trials support independent-input assumptions.
Check your reasoning: Does a precise value of Cᵥ prove the ideal model?
Continuity and Bernoulli explorer
Set the inlet and outlet pipe radii, inlet speed and pressure, liquid density, and outlet elevation. The diagram updates pipe widths and vector lengths to reflect the measured speed difference; the predictions use the same input values.
Ideal, inviscid, steady, incompressible fluid. The values are predictions, not measured results. Negative calculated absolute pressure signals the ideal model is not physically realizable in that state.
Bottle jet: does Torricelli predict range?
Bottle-jet design and uncertainty investigation. Ordinary plastic bottle, water, ruler, tray, paper, phone camera optional. Every student records raw observations, evaluates a model, calculates propagated uncertainty, and compares random scatter with systematic effects.
Derive the model and estimate expected measurements before collecting data.
Repeat controlled trials and record instrument resolution and experimental conditions.
Use a fitted graph and quantitative uncertainty to evaluate the model, then recommend a better design.
MCQ and extended-response problem bank
12 multiple-choice items and 4 multi-part college-physics problems, with detailed step-by-step solutions hidden in expandable panels. All prompts are newly authored; they do not reproduce the uploaded AP or ECE exams.
Open practice bank and solutionsExisting interactive module remains available
The original Fluid Mechanics interactive page is retained, including its specialized models and inquiries. This new extension lesson adds illustrated notes, a focused calculator, a formal physical lab, and an expanded question bank without replacing that original page.