Welch · Physics
AP Physics C/ECE1401 · Original assessment practice

Fluids: practice bank

12 original college-level MCQs and four extended written-response problems. Attempt the physics first; expand a solution to see a complete model and reasoning.

Filter practice

16 questions

Questions and expandable solutions

Original MCQ · F1 · Hydrostatics

In fresh water, the gauge pressure rises by approximately how much for every 0.75 m of depth?

A. 0.75 kPa
B. 7.36 kPa
C. 73.6 kPa
D. 736 kPa
Reveal answer and reasoning
Answer: B

ΔP=ρgΔh=(1000)(9.81)(0.75)=7358 Pa=7.36 kPa. Atmospheric pressure is not part of the gauge increment.

Original MCQ · F2 · Density

A 0.0060 m³ object has a mass of 4.8 kg. If completely submerged in water and released, its initial acceleration is closest to:

A. 2.45 m/s² upward
B. 9.81 m/s² downward
C. 2.45 m/s² downward
D. 0
Reveal answer and reasoning
Answer: A

Buoyancy=1000×9.81×0.0060=58.86 N; weight=4.8×9.81=47.09 N. Net upward=11.77 N, giving 11.77/4.8=2.45 m/s² upward.

Original MCQ · F3 · Pascal

Two ideal hydraulic pistons have areas in a 1:7 ratio. If the small piston moves 14 cm, the large piston moves:

A. 98 cm
B. 14 cm
C. 2 cm
D. 1 cm
Reveal answer and reasoning
Answer: C

Incompressibility requires A1d1=A2d2, so d2=14/7=2 cm. The force increases while the distance moved decreases.

Original MCQ · F4 · Pressure gradient

For a liquid at rest with upward-positive z, the differential relation is:

A. dP/dz=ρg
B. dP/dz=−ρg
C. dP/dz=0 for all fluids
D. Pz=ρg
Reveal answer and reasoning
Answer: B

Hydrostatic equilibrium gives pressure decreasing with upward height: dP/dz=−ρg.

Original MCQ · F5 · Continuity

A pipe radius becomes 0.75 of its original radius. For constant volumetric flow, speed becomes:

A. 0.56 times
B. 0.75 times
C. 1.33 times
D. 1.78 times
Reveal answer and reasoning
Answer: D

Area scales as r², so v2/v1=1/(0.75²)=1.777… .

Original MCQ · F6 · Bernoulli

An ideal steady water stream rises 1 m at constant speed. Which change in static pressure follows?

A. increases by 9.81 kPa
B. falls by 9.81 kPa
C. no change
D. falls by 98.1 kPa
Reveal answer and reasoning
Answer: B

Equal speeds cancel kinetic terms. P2−P1=−ρg(1 m)=−9810 Pa.

Original MCQ · F7 · Flow

Water flows at 0.0030 m³/s through a circular tube of area 0.0015 m². Average speed is:

A. 0.5 m/s
B. 2.0 m/s
C. 4.5 m/s
D. 5.0 m/s
Reveal answer and reasoning
Answer: B

v=Q/A=0.0030/0.0015=2.0 m/s.

Original MCQ · F8 · Torricelli

Ignoring all losses, the predicted exit speed from a hole at depth h scales as:

A. h
B. h²
C. √h
D. 1/h
Reveal answer and reasoning
Answer: C

v=√(2gh), so v∝√h. Squaring speed yields a linear dependence on depth.

Original MCQ · F9 · Jet experiment

For a horizontal bottle jet, with outlet height H fixed and losses negligible, plotting R² against h gives slope:

A. 2gH
B. 4H
C. g/H
D. 4g
Reveal answer and reasoning
Answer: B

R=2√(hH). Therefore R²=4Hh; slope is 4H (meters).

Original MCQ · F10 · Flow losses

Which observation most directly indicates a Bernoulli ideal-flow model is incomplete?

A. Equal inlet and outlet mass flow
B. A pressure decrease larger than ideal prediction
C. Consistent outlet speed across trials
D. A narrower section with faster speed
Reveal answer and reasoning
Answer: B

Real viscous dissipation can produce an additional pressure drop beyond ideal Bernoulli along a real pipe.

Original MCQ · F11 · Viscosity

In a tube obeying Poiseuille flow, reducing radius by 20% changes Q by a factor of:

A. 0.80
B. 0.64
C. 0.41
D. 0.20
Reveal answer and reasoning
Answer: C

Q∝r⁴ so (0.8)⁴=0.4096, about 0.41.

Original MCQ · F12 · Uncertainty

In C=R/(2√hH), if only h has a 6% relative uncertainty, its first-order relative contribution to uncertainty in C is:

A. 3%
B. 6%
C. 12%
D. 36%
Reveal answer and reasoning
Answer: A

The log derivative dC/C includes −½ dh/h, so 6% on h contributes 3% (for small errors).

Original ECE-style extended response · F13 · Control-volume mass flux

Water of density 1000 kg/m³ flows through a horizontal tapered channel at 0.0040 m³/s. At section A, area is 0.0030 m²; at section B, area is 0.0012 m². Pressure at A is 185 kPa. (a) Find speeds at A and B. (b) Find ideal pressure at B. (c) Predict what a real measured pressure of 174 kPa would imply about the model.

Reveal worked solution, organized by part
  1. vA=Q/AA=0.0040/0.0030=1.33 m/s; vB=0.0040/0.0012=3.33 m/s.
  2. PB=PA+½ρ(vA²−vB²)=185000+500(1.778−11.111)=180333 Pa ≈180 kPa.
  3. A measured 174 kPa is below the ideal value by about 6.3 kPa, consistent with additional head loss (assuming pressure sensors and geometry are reliable). State the limitations.

Full-credit reasoning: state assumptions, show equations with units, then interpret the physics and model limitations.

Original ECE-style extended response · F14 · Variable-density hydrostatics

A liquid column has density ρ(h)=1000+20h (kg/m³) for depth h in meters. The free surface is at atmospheric pressure. (a) Derive ΔP(d) by integration. (b) Evaluate at d=2.5 m. (c) Explain why replacing density with its surface value biases the answer.

Reveal worked solution, organized by part
  1. A thin slab gives dP=ρ(h)gdh; integrate: ΔP(d)=g∫₀ᵈ(1000+20h)dh=g(1000d+10d²).
  2. At d=2.5: ΔP=9.81(2500+62.5)=25138 Pa≈25.1 kPa.
  3. Using ρ=1000 throughout gives 24.5 kPa, an underestimate because density rises with depth.

Full-credit reasoning: state assumptions, show equations with units, then interpret the physics and model limitations.

Original ECE-style extended response · F15 · Bottle-jet investigation

A plastic bottle hole lies 0.60 m above a landing plane. Jet ranges for water depths 0.08, 0.12, and 0.18 m are 0.42, 0.52, and 0.63 m, respectively. (a) Predict ideal ranges. (b) Determine three Cᵥ values. (c) Describe a graph that tests the model and two relevant uncertainties.

Reveal worked solution, organized by part
  1. Rideal=2√(hH): 0.438, 0.537, 0.657 m.
  2. Cᵥ=R/Rideal: 0.959, 0.969, 0.959. The variation is small relative to physical effects.
  3. Graph R² vs h; a linear ideal model has slope 4H Cᵥ². Height uncertainty and range-landing location matter; add level fall during each release as a possible bias.

Full-credit reasoning: state assumptions, show equations with units, then interpret the physics and model limitations.

Original ECE-style extended response · F16 · Buoyancy with external support

A 2.5 kg instrument package of volume 0.0030 m³ is fully immersed in a liquid of density 1150 kg/m³, attached to a vertical cord above it. (a) Draw a force diagram in words. (b) Find cord tension if stationary. (c) State what happens if cord breaks, neglecting drag initially.

Reveal worked solution, organized by part
  1. Forces on the package: gravity mg downward, buoyancy ρgV upward, and tension upward.
  2. Weight=24.525 N; buoyancy=1150×9.81×0.0030=33.845 N. Stationary tension upward cannot balance an already net-upward 9.32 N; an upper cord would go slack. Equilibrium with an upper cord is impossible under assumptions.
  3. If released, initial acceleration=(33.845−24.525)/2.5=3.73 m/s² upward. This tests whether students reject an inconsistent assumption instead of reporting negative tension.

Full-credit reasoning: state assumptions, show equations with units, then interpret the physics and model limitations.