Questions and expandable solutions
Original MCQ · T1 · Ideal gasA fixed amount of ideal gas has temperature 300 K. At constant volume, heating to 450 K changes pressure by a factor of:
A. 0.67
B. 1.50
C. 2.00
D. 3.00
Reveal answer and reasoning
Answer: BP∝T in kelvin with fixed n,V. 450/300=1.50.
Original MCQ · T2 · First lawA gas absorbs 600 J of heat and does 250 J of boundary work. Its internal energy changes by:
A. +850 J
B. −350 J
C. +350 J
D. −850 J
Reveal answer and reasoning
Answer: CΔU=Q−Wby=600−250=+350 J.
Original MCQ · T3 · P-V workFor expansion at constant 125 kPa from 1.5 L to 4.5 L, work by the gas is:
A. 375 J
B. 125 J
C. 3.75 J
D. 375 kJ
Reveal answer and reasoning
Answer: AW=PΔV=125000×0.0030=375 J.
Original MCQ · T4 · IsothermalAn ideal gas expands isothermally. Which statement is true?
A. ΔU increases
B. Q is zero
C. Wby must be zero
D. Q=Wby
Reveal answer and reasoning
Answer: DFor ideal gas U depends only on T. ΔU=0, so Q=Wby for the sign convention used.
Original MCQ · T5 · Kinetic theoryAt fixed amount of monatomic ideal gas, U is proportional to:
A. volume
B. pressure alone
C. absolute temperature
D. container surface area
Reveal answer and reasoning
Answer: CU=(3/2)nRT, so U is proportional to absolute T.
Original MCQ · T6 · MixingEqual masses of the same liquid at 20°C and 46°C mix in ideal insulation. The final temperature is:
A. 20°C
B. 33°C
C. 46°C
D. 66°C
Reveal answer and reasoning
Answer: BEqual heat capacities mean the mass-weighted mean is (20+46)/2=33°C.
Original MCQ · T7 · Latent heatDuring equilibrium melting of pure ice at atmospheric pressure, adding heat primarily changes:
A. temperature of both phases
B. mass of liquid water
C. pressure only
D. specific heat capacity
Reveal answer and reasoning
Answer: BTemperature is approximately fixed while melting progresses; the energy changes the phase fraction.
Original MCQ · T8 · Thermal expansionAn ideal linear thermal expansion model gives ΔL/L₀ approximately equal to:
A. αΔT
B. α/ΔT
C. cΔT
D. 1/α
Reveal answer and reasoning
Answer: AΔL=αL₀ΔT. Divide by L₀.
Original MCQ · T9 · ConductionFor steady one-dimensional conduction through a slab, doubling thickness while holding other variables fixed changes heat flow rate to:
A. double
B. half
C. fourfold
D. unchanged
Reveal answer and reasoning
Answer: BRate kAΔT/L is inversely proportional to thickness.
Original MCQ · T10 · EntropyTwo different-temperature bodies are mixed in an insulated container. Total entropy change for the real mixing process must be:
A. negative
B. exactly zero
C. nonnegative
D. equal to heat lost by hot body
Reveal answer and reasoning
Answer: CThe isolated-system entropy change is positive for irreversible temperature equalization; zero is the reversible limit.
Original MCQ · T11 · Variable pressureFor expansion with P(V)=C/V, the exact work by the gas is:
A. C(Vf−Vi)
B. C ln(Vf/Vi)
C. C/Vf
D. zero
Reveal answer and reasoning
Answer: BIntegrating ∫Vi^Vf(C/V)dV=C ln(Vf/Vi).
Original MCQ · T12 · Calorimetry uncertaintyIn the ideal weighted mean temperature formula, which error is most directly a potential systematic bias?
A. trial-to-trial scatter
B. thermometer resolution
C. heat absorbed by the container
D. averaging independent trials
Reveal answer and reasoning
Answer: CA real initially cool cup gains heat; omitting it can systematically overestimate predicted Tf. Resolution and spread are reported separately.
Original ECE-style extended response · T13 · Two P–V pathsAn ideal monatomic gas with n=0.160 mol starts at P=180 kPa and V=2.0 L and ends at V=5.0 L. Consider (i) constant-pressure expansion and (ii) isothermal expansion. For each (a) find work by gas, (b) find ΔU, (c) find Q. Explain why two final states are not identical.
Reveal worked solution, organized by part
- At fixed P: Wby=180000(0.005−0.002)=540 J. ΔU=(3/2)PΔV=810 J. Q=1350 J.
- Isothermal: nRT=PiVi=360 J; Wby=360 ln(2.5)=330 J. ΔU=0, Q=330 J.
- The final volumes match, but final pressures and temperatures differ. Fixed-pressure and isothermal expansion do not reach the same thermodynamic state.
Full-credit reasoning: state assumptions, show equations with units, then interpret the physics and model limitations.
Original ECE-style extended response · T14 · Calorimeter calibrationA trial mixes 0.150 kg water at 43°C with 0.220 kg water at 21°C in a cup initially at 21°C. Final recorded temperature is 29.4°C. (a) Predict ideal Tf. (b) Estimate effective cup heat capacity assuming negligible external heat loss. (c) State two reasons the estimate might be biased.
Reveal worked solution, organized by part
- Tf,ideal=(0.150×43+0.220×21)/0.370=29.92°C.
- Ccup=c[mh(Th−Tf)/(Tf−Tc)−mc]=4186[0.150(13.6/8.4)−0.220]≈95.7 J/K.
- Thermometer lag and heat escape to the room could lower observed Tf, making apparent Ccup larger; measuring/cup temperature mismatch also matters.
Full-credit reasoning: state assumptions, show equations with units, then interpret the physics and model limitations.
Original ECE-style extended response · T15 · Piecewise thermal energyA 0.100 kg sample of ice at 0°C is added to 0.500 kg of water at 30°C in an insulated cup with negligible heat capacity. Using Lf=334,000 J/kg and cw=4186 J/(kg K), (a) check if all ice melts, (b) compute final T, and (c) explain your branch decision.
Reveal worked solution, organized by part
- Warm water can release 0.5×4186×30=62790 J by cooling to 0°C. Melting all ice requires 0.1×334000=33400 J, so yes.
- Remaining energy 29390 J warms 0.600 kg of water: Tf=29390/(0.6×4186)=11.70°C.
- Since energy was sufficient to melt all ice, the final equilibrium has only liquid water and T can rise above 0°C.
Full-credit reasoning: state assumptions, show equations with units, then interpret the physics and model limitations.
Original ECE-style extended response · T16 · Entropy and heat flowTwo equal 0.25 kg water samples at 350 K and 290 K are mixed in an ideally insulated container. Let c=4186 J/(kg K). (a) Find Tf. (b) Find total entropy change using ΔS=mc ln(Tf/Ti) for each sample. (c) Explain the sign and one idealization.
Reveal worked solution, organized by part
- Tf=(350+290)/2=320 K.
- ΔStotal=0.25×4186[ln(320/350)+ln(320/290)]=about +9.23 J/K.
- Positive entropy is generated by irreversible heat transfer across a finite temperature difference. We assume constant c and perfectly insulated surroundings.
Full-credit reasoning: state assumptions, show equations with units, then interpret the physics and model limitations.
Original MCQ · T17 · IsochoricAn ideal monatomic gas is heated in a rigid, sealed container so that its pressure rises from 140 kPa to 210 kPa. Which statement is correct?
A. Wby is positive
B. Wby is zero and Q = ΔU
C. The gas temperature is unchanged
D. Q must be negative
Reveal answer and step-by-step reasoning
Answer: BThe container has fixed volume, so dV = 0 and Wby = ∫P dV = 0. The first law becomes ΔU = Q. Because P rises at fixed n and V, temperature rises and Q is positive.
Original MCQ · T18 · AdiabaticA monatomic ideal gas expands reversibly without heat exchange from the same initial state used for a comparison isothermal expansion. Which path decreases in pressure more rapidly as volume increases?
A. Isothermal
B. Adiabatic
C. Both the same
D. Neither path changes pressure
Reveal answer and step-by-step reasoning
Answer: BFor an isothermal ideal gas P ∝ V−1. For a reversible adiabatic monatomic gas P ∝ V−5/3. Because 5/3 > 1, the adiabatic pressure falls faster.
Original MCQ · T19 · CompressionA quasi-static gas compression proceeds from 5.0 L to 2.0 L under positive pressure. What is the sign of work done by the gas?
A. Positive
B. Negative
C. Zero for every compression
D. Impossible without knowing temperature
Reveal answer and step-by-step reasoning
Answer: BThe differential dV is negative for compression. Since pressure is positive, Wby=∫P dV is negative regardless of the detailed pressure path. Work on the gas is positive.
Original MCQ · T20 · CycleA gas completes a cyclic series of quasi-static processes and returns to its initial thermodynamic state. Which conclusion must hold?
A. Qnet=0 for every cycle
B. ΔUcycle=0
C. Wnet=0 for every cycle
D. Every segment is isothermal
Reveal answer and step-by-step reasoning
Answer: BInternal energy is a state function. On return to the initial state, ΔUcycle=0; the first law gives Qnet=Wnet,by. The signed loop area can be nonzero.
Original extended response · T21 · Adiabatic P–V graphA fixed amount of monatomic ideal gas begins at 180 kPa and 2.0 L and expands reversibly without heat exchange to 5.0 L. (a) Find the final pressure from the defining constraint. (b) Compute work done by the gas using an integral. (c) Find ΔU and Q. (d) Sketch the process beside an isotherm from the same starting state and explain their relative steepness.
Reveal worked derivation and scoring steps
- Use γ=5/3 and Pf=Pi(Vi/Vf)γ=180(2/5)5/3 ≈ 39.1 kPa.
- Integrate W=∫ViVfPi(Vi/V)γdV=(PiVi−PfVf)/(γ−1). With kPa·L = J, W ≈ 247 J.
- Q=0 and ΔU=Q−W ≈ −247 J. This is consistent with a lower temperature.
- The adiabatic curve drops faster than the isothermal P∝1/V curve. Label both states and axes; note they share only the initial state and final volume, not the final pressure.
Original extended response · T22 · Three boundary-work pathsA monatomic ideal gas starts at 180 kPa, 2.0 L. A new state at 5.0 L is reached through one of three quasi-static paths: isobaric; isothermal; or linear pressure with Pf=135 kPa. For each path derive Wby, ΔU, and Q. Identify which of the three has the greatest work by the gas and explain why their final temperatures differ.
Reveal worked derivation and scoring steps
- Isobaric: W=180(5−2)=540 J; ΔU=(3/2)(900−360)=810 J; Q=1350 J.
- Isothermal: W=360 ln(5/2)≈330 J; ΔU=0; Q≈330 J.
- Linear: W=0.5(180+135)(5−2)=472.5 J; ΔU=(3/2)(135×5−180×2)=472.5 J; Q=945 J.
- At the same final volume, the isobaric path maintains the largest pressure throughout the expansion and hence the largest integral ∫P dV. Different final PV implies different ideal-gas final temperatures.