A hexagonal prism has how many faces, edges and vertices?
Lesson Map
Five connected subsections. Revisit polygon area, circle measurements, right triangles and algebra as you build toward the engineering challenge.
| Lesson | Focus | Target skill | Blocks |
|---|---|---|---|
| 6.1 | Solid Geometry | Classify solids, count faces, edges and vertices, and connect solids to their nets. | 1 |
| 6.2 | Prisms & Cylinders | Use base area and perimeter to find volume, lateral area, total surface area and missing dimensions. | 2 |
| 6.3 | Pyramids & Cones | Distinguish slant height from vertical height; calculate volume and surface area of pyramids and cones. | 2 |
| 6.4 | Spheres | Calculate surface area and volume of spheres and work backward to determine radius or diameter. | 1 |
| 6.5 | Composite Solids | Break complex solids into familiar pieces, calculate total volume and exposed area, and apply the results to engineering design. | 1 + 5 project |
Suggested pacing: seven core lesson blocks, five project blocks, plus review and assessment.
Solid Geometry Explorer
Choose a shape, then change its measurements. Predict what changes before moving a slider. Compare volume and surface area; look at the formulas and the labeled model.
Double every linear dimension: surface area becomes 4 times as large; volume becomes 8 times as large.
Explore and explain
- Set a cylinder to radius 3 and height 8. Predict its volume and area; then compare.
- Choose a cone with the same radius and height. Explain why its volume is one-third of the cylinder.
- For a sphere, change radius from 3 to 6. Compare the two volumes and areas.
Introduction to Solid Geometry
Classify solids, count faces, edges and vertices, and connect solids to their nets.
Retrieval • from prior units
- How many sides does a hexagon have?
Check
6 - Find the area of a 5 cm by 3 cm rectangle.
Check
15 cm²
Vocabulary
Visual anchor • label relevant dimensions before solving.
Definitions
Polyhedron: A solid bounded by flat polygonal faces.
Face: A flat polygonal surface.
Edge: A segment where two faces meet.
Vertex: A point where edges meet.
Base: A defining face of a prism or pyramid.
Net: A flat arrangement that folds into a solid.
Rules and relationships
- Euler’s Theorem: V − E + F = 2 for convex polyhedra. Here V counts vertices, not volume.
- Prism structure: An n-sided prism has F = n + 2, E = 3n, V = 2n.
- Pyramid structure: An n-sided pyramid has F = n + 1, E = 2n, V = n + 1.
- Nets: Count every face once; matching edges must have equal lengths.
Worked Examples
A convex polyhedron has 10 faces and 16 vertices. Find its edges.
Worked solution
What faces form a triangular prism net?
Worked solution
Practice Problems
Try each on paper, then reveal the answer to check your reasoning.
Count F, E and V for an octagonal prism.
Show answer
A convex polyhedron has 12 vertices and 8 faces. Find E.
Show answer
Name the faces in a square pyramid net.
Show answer
Explain why a cone is not a polyhedron.
Show answer
Accompanying videos for Lesson 6.1 · Explore the model
Visual reference • Cube net
Prisms and Cylinders
Use base area and perimeter to find volume, lateral area, total surface area and missing dimensions.
Retrieval • from prior units
- Find the area of a triangle with base 8 cm and altitude 5 cm.
Check
20 cm² - Find the area and circumference of a circle with diameter 10 cm.
Check
25π cm²; 10π cm
Vocabulary
Visual anchor • label relevant dimensions before solving.
Definitions
Volume: Space occupied by a solid, in cubic units.
Surface area: Area of the entire exterior, in square units.
Lateral area: Area of the sides, excluding bases.
Cross section: A plane slice through a solid.
Perpendicular height: Distance between the bases.
Circumference: Distance around a circle.
Rules and relationships
- Prism and cylinder volume: V = Bh. B is base area and h is perpendicular height.
- Right prism surface area: SA = 2B + Ph. P is the perimeter of the base.
- Cylinder surface area: SA = 2πr² + 2πrh; the lateral rectangle is 2πr by h.
- Missing dimensions: Substitute known values, isolate the unknown, then check units.
Worked Examples
A 6 × 4 × 9 cm rectangular prism: find volume and total surface area.
Worked solution
A right triangular prism has 5-12-13 cm bases and length 8 cm. Find V and SA.
Worked solution
A cylinder has diameter 8 cm and height 11 cm. Find V and SA.
Worked solution
A cylinder has volume 180π cm³ and radius 3 cm. Find h.
Worked solution
Practice Problems
Try each on paper, then reveal the answer to check your reasoning.
Find V and SA of a 3 × 7 × 10 cm box.
Show answer
A cylinder has r = 6 m, h = 4 m. Find V and SA.
Show answer
A right triangular prism has legs 6 and 8 cm and length 7 cm. Find V and SA.
Show answer
A prism has B = 18 cm² and V = 162 cm³. Find height.
Show answer
Accompanying videos for Lesson 6.2 · Explore the model
Visual reference • Cylinder net
Pyramids and Cones
Distinguish slant height from vertical height; calculate volume and surface area of pyramids and cones.
Retrieval • from prior units
- Find the hypotenuse when legs are 6 and 8.
Check
10 - Find the area of a triangle with base 12 and altitude 5.
Check
30 square units
Vocabulary
Visual anchor • label relevant dimensions before solving.
Definitions
Apex: The top vertex of a pyramid or cone.
Slant height: Height of a triangular lateral face or length along a cone from apex to rim.
Vertical height: Perpendicular distance from apex to base plane.
Regular pyramid: A right pyramid with a regular polygon base.
Lateral face: A triangular side of a pyramid.
Rules and relationships
- Pyramid and cone volume: V = ⅓Bh. Use perpendicular height h.
- Regular pyramid surface area: SA = B + ½Pℓ. ℓ is the common face slant height.
- Right cone surface area: SA = πr² + πrℓ.
- Pythagorean height relation: Cone: ℓ² = h² + r². Right square pyramid: ℓ² = h² + (s/2)².
- Rectangular pyramid: If the base is not square, add individual triangular face areas; slant heights may differ.
Worked Examples
A square pyramid has base side 12 cm and vertical height 8 cm. Find V and SA.
Worked solution
A cone has r = 5 cm and h = 12 cm. Find V and SA.
Worked solution
A right rectangular pyramid has base 10 × 6 m and height 4 m. Find V.
Worked solution
Practice Problems
Try each on paper, then reveal the answer to check your reasoning.
Find volume of a rectangular pyramid with base 9 × 4 m and h = 7 m.
Show answer
Find V and SA of a cone with r = 8 cm and h = 15 cm.
Show answer
A right square pyramid has s = 10 cm and h = 12 cm. Find SA.
Show answer
A cone has r = 3 cm and V = 45π cm³. Find h.
Show answer
Spheres
Calculate surface area and volume of spheres and work backward to determine radius or diameter.
Retrieval • from prior units
- Find the radius if diameter is 18 cm.
Check
9 cm - Evaluate √81 and ∛125.
Check
9 and 5
Vocabulary
Visual anchor • label relevant dimensions before solving.
Definitions
Sphere: A solid whose surface points are all the same distance from its center.
Radius: Distance from the center to the surface.
Diameter: A segment through the center connecting opposite surface points.
Great circle: A circular cross section through the center.
Cube root: The number that cubed gives the original number.
Rules and relationships
- Sphere surface area: SA = 4πr².
- Sphere volume: V = ⁴⁄₃πr³.
- Inverse sphere volume: r = ∛(3V / 4π).
- Inverse sphere area: r = √(SA / 4π).
- Scaling: Doubling radius multiplies surface area by 4 and volume by 8.
Worked Examples
A sphere has diameter 12 cm. Find SA and V.
Worked solution
A sphere has volume 36π m³. Find radius.
Worked solution
A sphere has area 196π cm². Find diameter.
Worked solution
Practice Problems
Try each on paper, then reveal the answer to check your reasoning.
A sphere has radius 5 cm. Find SA and V.
Show answer
Find V of a sphere of diameter 18 m.
Show answer
A sphere has volume 288π ft³. Find radius.
Show answer
If r triples, how do SA and V change?
Show answer
Composite Solids and Applications
Break complex solids into familiar pieces, calculate total volume and exposed area, and apply the results to engineering design.
Retrieval • from prior units
- Find V of a 4 × 5 × 6 cm box.
Check
120 cm³ - Find the area of a circle with radius 3 cm.
Check
9π cm²
Vocabulary
Visual anchor • label relevant dimensions before solving.
Definitions
Composite solid: A solid formed from two or more simpler solids.
Decomposition: Breaking a figure into nonoverlapping parts.
Exposed surface: A surface on the exterior, not a joined interior face.
Capacity: The internal volume a container can hold.
Material efficiency: Volume divided by surface area (or actual material area).
Percent error: Absolute difference from a reference divided by the reference, times 100%.
Rules and relationships
- Composite volume: Add nonoverlapping pieces; subtract removed regions.
- Composite surface area: Add exposed faces only. Subtract twice the shared area when adding full areas of two solids joined face-to-face.
- Engineering constraints: Check target volume, material allowance, stability and closure.
- Percent error: |measured − predicted| / predicted × 100%.
Worked Examples
A stepped solid consists of a 10 × 4 × 3 cm lower box and a 4 × 4 × 5 cm upper box. Find V.
Worked solution
A 10 × 8 × 6 cm block has a 2 × 3 × 6 cm rectangular tunnel cut through it. Find remaining volume.
Worked solution
A cylinder r = 3 cm, h = 10 cm has a cone of the same radius and height 4 cm joined on top. Find total V and exposed SA.
Worked solution
Practice Problems
Try each on paper, then reveal the answer to check your reasoning.
A 12 × 5 × 2 cm lower box supports a 5 × 5 × 4 cm upper box. Find V.
Show answer
A 7 × 6 × 5 cm block loses a 2 × 3 × 5 cm tunnel. Find remaining V.
Show answer
A closed cylinder r = 4 cm, h = 5 cm is joined to a hemisphere of the same radius. Find total V.
Show answer
Two 3 cm cubes share a full face. Find exposed SA.
Show answer
Equation Bank
B = base area; P = base perimeter; h = perpendicular height; ℓ = slant height; r = radius; s = base side. All formulas use consistent units.
Accompanying Videos
Direct video links by lesson. Use these to preview or revisit the worked examples.
6.1 • Solid Geometry
Euler’s Formula for Polyhedra — Math with Mr. J
Count faces, edges and vertices and use Euler’s relationship.
Watch video directly ↗Nets and surface area — Mario’s Math Tutoring
Start at 2:59 for nets and their role in surface area.
Watch video directly ↗6.2 • Prisms & Cylinders
Prisms and cylinders — Mario’s Math Tutoring
Start at 0:24; includes box, triangular prism and cylinder.
Watch video directly ↗Cylinder volume & surface area — Khan Academy
Use radius and height to find both measurements.
Watch video directly ↗6.3 • Pyramids & Cones
Pyramids and cones — Mario’s Math Tutoring
Start at 9:27 for volume, slant height and surface area.
Watch video directly ↗Surface area of a rectangular pyramid — Khan Academy
For non-square bases and two slant heights.
Watch video directly ↗6.4 • Spheres
Volume of a sphere — Khan Academy
See why the radius is cubed.
Watch video directly ↗Sphere surface area and volume — Mario’s Math Tutoring
Start at 15:01 for both sphere formulas.
Watch video directly ↗6.5 • Composite Solids
Volume of composite solids — Khan Academy
Break a stepped figure into rectangular prisms.
Watch video directly ↗Mixed Practice
Identify the solid and select the equation before calculating.
A right cone has diameter 12 cm and height 8 cm. Find total SA and V.
Show answer
A sphere has volume 1372π/3 in³. Find r.
Show answer
A prism has 24 edges. How many faces and vertices?
Show answer
A right square pyramid has side 14 m and h=24 m. Find total SA.
Show answer
A right triangular prism has 7-24-25 cm bases and length 5 cm. Find V and SA.
Show answer
A cylinder has radius 5 cm and V=250π cm³. Find h and SA.
Show answer
Packaging Engineering Design Challenge
Design a closed package with internal volume 250–275 cm³, use at most two sheets per prototype, and build, test and improve it. Work in teams of three. Cubes are reserved for the worked example; spheres are digital comparison only.
- Block 1: Explore three distinct non-cube shapes and record dimensions, volume, surface area and trade-offs.
- Block 2: Select a buildable design. Verify the calculations by hand, draw and label the net, obtain teacher approval.
- Block 3: Construct prototype 1 from cardstock, record material usage and construction observations.
- Block 4: Measure capacity, dimensions, stability and closure; redesign using evidence and build prototype 2.
- Block 5: Retest, compare, present and reflect individually.
Use the full project packet for the 100-point rubric and all design logs.
Student Workbook
Follow along with the lesson notes, guided examples, practice, and skills checks.
Download student workbook · PDF Open workbook in a new tab
If the viewer is unavailable, open or download the workbook using the links above.